Top pick for a first sample order: the Neverfull MM, which the maison lists at roughly 31 x 28 x 17 cm, verified against a centimeter size chart from the factory. The criteria apply to every model in this guide: a chart given in centimeters first, all three axes plus strap drop and handle rise, a stated measuring method (filled or flat), and a tolerance under about half a centimeter on structured shapes. Photos can be staged. A tape measure cannot.
Why Dimensions Are the First Check
Dimension errors are the one defect a supplier cannot hide with lighting, angle, or a better batch of hardware. A Neverfull GM that arrives at 36 cm instead of 39.5 cm reads as a mid-size tote in person, and it will not sit right on the shoulder. Because houses publish length, height, and width for each size variant, you have a fixed reference to compare against before money changes hands.
Most disputes come from mixing units. One inch equals exactly 2.54 cm, so a US listing in inches and a factory sheet in centimeters will differ by a few millimeters after rounding. That gap is arithmetic, not a defect. Compare like with like.
Neverfull Family: PM, MM, GM
Reference points for current production: PM at about 28.5 x 22 x 13 cm, MM at about 31 x 28 x 17 cm, GM at about 39.5 x 32 x 20 cm.
Pros
- The base is square with clear corner seams, so length and depth are simple to measure.
- Sizes step in large increments, which makes a wrong chart obvious on arrival.
- Soft coated canvas forgives small variance in height once the bag is packed.
- High order volume means most wholesale suppliers hold all three sizes.
Cons
- Side lacing and cinch straps change the silhouette, so a flat measurement undersells the filled measurement by 1 to 2 cm.
- Trim width and handle thickness vary between batches and distort the proportions.
- Base depth is the easiest figure to fudge on a spec sheet.
Use it for: the MM as a daily tote, the GM for travel or a 13-inch laptop, the PM as a small shoulder bag. If you stock one size only, stock the MM.
Speedy 20, 25, 30, 35
Reference points: the 20 at about 20.5 x 15.5 x 12 cm, the 25 at about 25 x 19 x 15 cm, the 30 at about 30 x 21 x 17 cm, and the 35 at about 35 x 23 x 18 cm.
Pros
- The barrel shape means length runs along the zipper, which is the easiest axis on the whole bag to check.
- Sizes are numbered, so you can test a chart against its own name.
- Bandoulière versions let you quote a strap drop alongside the body size.
Cons
- The 20 and the 25 are close enough that a careless chart swaps them.
- Rolled handles and zipper end caps vary more than the body does.
- Hardware is often scaled by eye, so a 25 can arrive with 30-sized rings.
Use it for: the 25 as an everyday crossbody, the 30 as a compact work bag, the 20 for evenings. Check the strap drop before the body length on this family.
Alma BB and Pochette Métis
Reference points: the Alma BB at about 23.5 x 17.5 x 11.5 cm, the Pochette Métis at about 25 x 19 x 7 cm.
Pros
- Both are structured, so a sagging panel or a shallow gusset shows up the moment you unpack it.
- Depth on the Pochette Métis is small and checkable with a rigid ruler.
Cons
- Structured shapes expose every millimeter of depth error that canvas would hide.
- The curved base on the Alma BB is the hardest element to replicate at scale.
- Flap placement on the Pochette Métis shifts with the front panel cut, which changes the apparent height.
Use it for: the Alma BB as a dress bag, the Pochette Métis as a daily crossbody with compartments. Ask for a filled photo of the Alma BB, because the shape matters as much as the number.
Keepall 45 and 55, Onthego MM
Reference points: Keepall 45 at about 45 x 27 x 20 cm, Keepall 55 at about 55 x 31 x 25 cm, Onthego MM at about 35 x 28 x 14 cm.
Pros
- The Keepall size is printed in the model name, so a 45 that measures 43 cm is an immediate fail with no argument.
- The Onthego MM has a wide, flat base that takes a tape measure without guesswork.
Cons
- Side bands and end panels flex once the bag is packed, adding height.
- Reversed canvas panels on the Onthego can shift the seam line and change the front width.
Use it for: Keepall 45 for weekend travel, Keepall 55 for longer trips, Onthego MM as a work tote. Check the handle rise on the Keepall, since a short roll sits wrong in the hand.
How to Measure a Replica Bag
- Empty the bag, then repack it the way a customer would carry it. Filled length on soft canvas runs 1 to 2 cm over the flat figure.
- Measure length across the widest point of the base, seam to seam, not across the opening.
- Measure height from the base seam to the top edge of the opening, with the strap out of the way.
- Measure depth across the base gusset from the side, with the bag standing.
- Measure strap drop from the top of the strap arc down to the top edge, on the longest setting.
- Measure handle rise from the top edge to the inside of the handle.
- Work in centimeters first and convert second. A rigid tape beats a soft tailor's tape on structured shapes.
What Counts as a Pass
- 0 to 5 mm on any axis: passes without comment.
- 5 to 10 mm on soft canvas: normal, particularly in height once filled.
- 10 to 15 mm: request a photo of that axis with a ruler in frame before accepting the batch.
- Over 15 mm on a structured bag: reject the lot.
- Strap drop off by more than 20 mm: reject, regardless of body size.
- Hardware scaled to the wrong size class: reject. That is a visual tell, not a measurement error.
Questions to Ask a Wholesale Supplier
- Can you send the centimeter chart for this exact batch, not for the model in general?
- Do you measure filled or flat, and at which point on the base?
- What is the strap drop in centimeters on the longest hole?
- Can you send one photo per axis with a ruler visible?
- Can I mix sizes inside one sample carton?
- What is your policy if a unit lands more than 1 cm off the chart?
Order a mixed sample carton, measure all three axes on arrival, and keep the chart on file. A supplier who answers the six questions above with numbers, rather than adjectives, is the one worth reordering from.